---
title: Wobbler – Artwork Specification
description: "### GENERAL ARTWORK DIMENSION Bleeding : 2mm from all sides of edges (Artwork Dimension) Margin : 2mm from all sides of edges (Safe Zone) Example: Wobbler size 89mm x 54mm, therefore Bleeding Size : 93mm x 58mm Actual Size :…"
url: "https://momocodesign.com/docs/wobbler-artwork-specification/"
updated: "2025-06-18"
category: Product Artwork Specification
---

# Wobbler – Artwork Specification

### GENERAL ARTWORK DIMENSION

Bleeding : 2mm from all sides of edges (Artwork Dimension)
Margin : 2mm from all sides of edges (Safe Zone)

Example:
Wobbler size 89mm x 54mm, therefore
Bleeding Size : 93mm x 58mm
Actual Size : 89mm x 54mm
Safe Zone : 85mm x 50mm

#### Gluing Area

Fixed at center of the back side of the printing sheet, please use our template when preparing the artwork. ![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-2-12-1024x539.webp)

### FILE FORMAT

**Adobe Acrobat Document (\*.pdf)**

- Provide better printing quality **TIFF Image (\*.tiff)**
- Provide fairly good printing quality if the file is converted under certain specification
- Setback: Blurred text or vector images compare with pdf file format **JPEG Image (\*.jpg / \*.jpeg)**
- Provide fairly good printing quality if the file is converted under certain specification
- Setback: Blurred text or vector images compare with pdf file format

### STANDARD CHECKLIST

#### ARTWORK

- Artwork is prepared in our Product Size Templates
- Background design expand to Full Bleed size
- Vital elements are within Safe Zone 
- No crop mark are applied

#### DESIGN

- All images have been exported / converted to TIFF files
- Background, design effects, photos, images (not including text / vector images) Never manipulate images in layout program
- Resolution: 300dpi
- Color Mode: CMYK

#### FONTS

- No fonts of less than 4 pts
- Curve / Path / Create outline all fonts

#### MARKING & TRAPPING

- Do not apply any crop mark and trapping to your files, including box, bleeding marking, margin marking and custom die cut (Dotted line).

#### LINE WEIGHT

- No lines are less than 0.25pts

#### FILE FORMAT

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-3-12-1024x250.webp)

### FILE PREPARATION

Page Arrangement for Standard Wobbler in ONE PDF file
Page 1: Overview artwork (CMYK + Die Line)

Page Arrangement for Custom Die Cut Wobbler in ONE PDF file
Page 1: Overview artwork (CMYK + Die Line)

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-4-11-1024x639.webp)

Page 2: Printable artwork only (CMYK)

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-5-9-1024x639.webp)

Page 3: Die Line only

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-6-10-1024x624.webp)

### DIE LINE PRECAUTIONS

Cutting Edge Tolerance: +- 1mm Below are mis-registration scenario that can be happen during the die-cut process when die line is not correctly placed, as + – 1mm cutting edge tolerance has to be taken into consideration.

Scenario 1: What happens when die line falls exactly on the artwork line. ![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-7-8-1024x284.webp)

Scenario 2: What happens when die line is exactly on different colour background. ![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-8-4-1024x644.webp)

\* Customer is advised to revise artwork when these problems are detected.

\* Expressprint shall not be held liable for any of defect in printing outcome due to artwork sent not correctly prepared as advised.

### GAP BETWEEN MULTI-EDGES DIE-LINE

How to define “Multi-Edges Die-Line”: More than 5 cutting edges within 10mm. ![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-9-4-1024x706.webp)