---
title: Voucher – Artwork Specification
description: "### HOW TO CORRECTLY PREPARE VOUCHER ARTWORK. ![Voucher Template](https://momocodesign.com/wp-content/uploads/2025/02/voucher-template.webp) **Important** 1. The vital elements of your artwork MUST within the Safe Zone and at least 5mm away from perforation life. 2. For Book Type it is compulsory to have a…"
url: "https://momocodesign.com/docs/voucher-artwork-specification/"
updated: "2025-06-18"
category: Product Artwork Specification
---

# Voucher – Artwork Specification

### HOW TO CORRECTLY PREPARE VOUCHER ARTWORK.

![Voucher Template](https://momocodesign.com/wp-content/uploads/2025/02/voucher-template.webp)

**Important**

1. The vital elements of your artwork MUST within the Safe Zone and at least 5mm away from perforation life.
2. For Book Type it is compulsory to have a minimum of 22mm, for stitching purpose.
3. You may DELETE or ADD the number of perforation lines in Product Size Template according to your requirement.
4. The minimum gap between any two perforation lines MUST BE 45mm.
5. Expand your background design to the edge of Full Bleed.
6. When converting artwork to PDF format, delete all guidelines in the Product Size Template EXCEPT for the numbering format and the perforation lines required.

### NUMBERING

![](https://momocodesign.com/wp-content/uploads/2025/02/numbering.webp)

1. Mark your numbering area by using the numbering format given in the Product Size Templates.
2. Numbering will be printed in RED colour. Dark coloured background will cause the numbering to become invisible.
3. You will only have to key-in the actual numbering during the ordering process. The **last digit** must always begin with **1**.
   *Examples : 00001 00101 00501 03001 *
4. To indicate numbering in your artwork. Please use the dummy numbering provided in the product size template.
5. If you require less than the default 7 digits (represented by Xs in green), please **DELETE** the excess Xs accordingly.
   *Examples : 0001 – **XXXX** 00101 – **XXXXX** 000001 – **XXXXXX***
6. Numbering can be placed in different areas for each panel.
7. Maximum 1 numbering in a perforation panel.
8. You need to apply the same numbering on all panels.
9. For Loose/Pad Type, you can only choose to either have all panels with numbering or all panels without numbering.
10. For Book Type, you can choose to have all panels with numbering, all panels without numbering or 1st panel without numbering option.
11. Numbering and numbering minimum gap is **45mm**.
12. Ensure your numbering format is:
    – within **Safe Zone**
    – at least **7mm** away from **Full Bleed** edge
    – at least **12mm** away from perforation line (if applicable)
13. **DELETE** entire numbering format if you do not require it.

**DIAGRAM 1:** NUMBERING FORMAT ALLOCATION FOR PAD/LOOSE TYPE
![](https://momocodesign.com/wp-content/uploads/2025/02/numbering-format-pad.jpg)

**DIAGRAM 2:** NUMBERING FORMAT ALLOCATION FOR BOOK TYPE
**Diagram 2a**: 1st Panel without Numbering
![](https://momocodesign.com/wp-content/uploads/2025/02/dia-2a.webp)

**Diagram 2b**: 1st Panel with Numbering
![](https://momocodesign.com/wp-content/uploads/2025/02/dia-2b.webp)

### PERFORATION

1. When without numbering:
   a) the gap between any two perforation lines MUST BE at least **45mm**
   b) Book Type
   – the gap between left edge & perforation MUST BE at least **20mm** (Refer Diagram 3a)
   – the gap between perforation line & right edge MUST BE at least **45mm** (Refer Diagram 3a)
   c) Pad/Loose Type: the gap between perforation line & left/right edge MUST BE at least **45mm** (Refer Diagram 4)
2. When with numbering:
   a) the gap between any two perforation lines MUST BE at least **71mm**
   b) Book Type
   – the gap between left edge and perforation line MUST BE at least **60mm** (Refer Diagram 3b)
   – the gap between perforation line and right edge MUST BE at least **50mm** (Refer Diagram 3b)
   c) Pad/Loose Type: the gap between perforation line & left/right edge MUST BE at least **50mm** (Refer Diagram 4)
3. For **Book Type**, it is **compulsory** to have a minimum of 1 perforation line.
4. The location of the perforation lines can be adjusted.
5. You may **DELETE** or **ADD** the number of perforation lines in Product Size Template according to your requirement

**Diagram 3a**: perforation allocation for book type (without numbering)

![](https://momocodesign.com/wp-content/uploads/2025/02/dia-3a.webp)

**Diagram 3b**: perforation allocation for book type (with numbering)

![](https://momocodesign.com/wp-content/uploads/2025/02/dia-3b.webp)

**Diagram 4a**: perforation allocation for pad/loose type (without numbering)

![](https://momocodesign.com/wp-content/uploads/2025/02/dia-4a.webp)

**Diagram 4b**: perforation allocation for pad/loose type (with numbering)
![](https://momocodesign.com/wp-content/uploads/2025/02/dia-46.webp)

### ARTWORK ORIENTATION

![orientation-voucher](https://momocodesign.com/wp-content/uploads/2025/02/orientation-voucher.webp)