---
title: L Shape Plastic Folder – Artwork Specification
description: "### BLEEDING & SAFE ZONE **Bleeding** : 2mm from each side. ![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-2-3-1024x677.webp) **Safe Zone** : 5mm for top, left & right edges. While 10mm for bottom edge. ![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-3-3-1024x675.webp) ### ARTWORK PRECAUTION - Folding Tolerance : +-1mm Recommend to use same background colour…"
url: "https://momocodesign.com/docs/l-shape-plastic-folder-artwork-specification/"
updated: "2025-06-18"
category: Product Artwork Specification
---

# L Shape Plastic Folder – Artwork Specification

### BLEEDING & SAFE ZONE

**Bleeding** : 2mm from each side.

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-2-3-1024x677.webp)

**Safe Zone** : 5mm for top, left & right edges. While 10mm for bottom edge.

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-3-3-1024x675.webp)

### ARTWORK PRECAUTION

- Folding Tolerance : +-1mm Recommend to use same background colour while prepare artwork to avoid colour overlap onto other page after folding.
- ![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-4-3-1024x716.webp)

###  

**IMPORTANT:**
PLEASE AVOID YOUR ARTWORK CONTAIN DESIGN OR LAYOUT AS BELOW:

1. Different Colour Background

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-5-2-1024x466.webp)

2. Background artwork with stripe design

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-6-2-1024x849.webp)

3. Extended graphic on the folding line

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-7-1-1024x718.webp)

REMARK: EXPRESSPRINT WILL NOT HELD ANY RESPONSIBILITY IN THE CIRCUMSTANCES SHOWN AS ABOVE.

###  

### SUBMIT ARTWORK FOR L-SHAPE PLASTIC FOLDER FILE

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-8-1-1024x164.webp)

###  

### IMPORTANT NOTES IN PREPARING WHITE BASE ARTWORK

- Fill the artwork with black (K100) to indicate the area for white base.
- Rename colour to precisely “ White” to indicate the area of white base instead “WHITE” or “white”
  *\*Expressprint will not held responsibility on any wrong white spot colour naming error. (eg. “WHITE” or “white” or “White(space)” )*
- Only use Adobe Illustrator to prepare the white base artwork.
- JPEG file format or JPEG save in PDF format is not allowed while prepare white based artwork.
- White based artwork must prepare in VECTOR Rename the color swatch name by using Adobe Illustrator

![](https://momocodesign.com/wp-content/uploads/2025/02/Layer-9-1-1024x993.webp)

###  

### STANDARD CHECKLIST :

#### COLOUR

- Use ONLY CMYK colour mode in your artwork -No colour tints (toning) lower than 10%
- Do not set black colour to (C=100 M= 100 Y= 100 K= 100)
- Make sure the value between colours are at least 10% of different. (Tint / toning effect more obvious)

#### LINE

- Line weight not less than 0.25points (Not applicable for Pre-Inked stamp,spot UV,Hot Stamping)

#### IMAGES

- All images are in CMYK colour mode
- Resolution of all images are set to or above 300dpi.
- Scanned line Art/Black & White images resolution are set to or above 1200dpi.
- Do not manipulate images using a layout program

#### TEXT

- No font less than 4points -Curve / Path / Create outline all fonts

#### ARTWORK

- Artwork is prepared in our Product Size Templates
- Background design expand to
- Full Bleed size
- No crop mark are applied
- Ensure artwork orientation

#### DESIGN

- All images have been exported / converted : Background, design effects, photos, images to TIFF files (not including text / vector images)
- Never manipulate images in layout program resolution: 300 dpi -Color Mode: CMYK color mode

#### FILE FORMAT

- Artwork is saved in required file format : Adobe acrobat Document (\*.pdf)
- Resolution: 300 dpi
- Color Mode: CMYK color mode

#### FILE NAME

- use only alphanumeric

#### MARKING & TRAPPING

- Never apply any crop mark or trapping onto the files.